Page 283 - Manual Oficina Polaris RS1 2018 e 2019

TRANSMISSION

12.Pull the muffler towards the rear of the vehicle to 15.Remove two brake caliper mounting bolts t and
remove from isolators. remove caliper from hub.

16.Remove cotter pin, castle nut, and one cone washer.
NOTE
Discard cotter pin.
The remaining exhaust system does not need to be
removed for engine removal.

13.Lift and support the rear of the vehicle.

WARNING 6
Use care when supporting vehicle so that it does not tip
or fall. Serious injury may occur if vehicle tips or falls.

14.Remove four lug nuts t and remove the left hand
rear wheel.

NOTE
Note orientation of cone washer.

17.Remove hub assembly.

9928689 - 2018 RZR RS1 Service Manual 6.7
© Copyright Polaris Industries Inc.