Page 284 - Manual Oficina Polaris RS1 2018 e 2019

TRANSMISSION

18.Remove the upper and lower radius rods from the 22.Remove two fasteners u securing the shock to the
bearing carrier by removing two fasteners y . Allow frame.
the radius rods to hang towards the ground.

NOTE
19.While pulling the trailing arm away from the vehicle
push the CV shaft towards the vehicle until it is clear Take care when storing shock to not damage threads
of the bearing carrier. Once it is clear of the bearing on shock body.
carrier move it towards the rear of the vehicle.
23.Remove PVT intake duct i .

20.Remove the CV shaft from the transmission by
quickly pulling the CV shaft away from the vehicle. 24.Remove nine PVTcover fasteners o and cover.
21.Remove the shock remote reservoir by loosening the
worm clamps and cable tie.

25.Remove drive belt by inserting tool PN 2875911 into
the driven clutch.

6.8 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.