Page 367 - Manual Oficina Polaris RS1 2018 e 2019

STEERING / SUSPENSION

10.Install the steering wheel and hand tighten the nut.
Apply Loctite 271 ™.
®
11. Reinstall the steering shaft assembly in the vehicle.
Install the lower portion of the steering shaft onto the
steering gear box assembly (see Figure 5-16). Torque
the lower pinch bolt to specification.
TORQUE
Lower Steering Shaft to Steering Rack Pinch Bolt:
50 ft-lbs (68 Nm)
12.Install the two fasteners that retain the pivot tube (see
Figure 5-17). Torque fasteners to specification.
TORQUE
Pivot Tube Fasteners:
40 ft-lbs (54 Nm)

13.Install the fastener retaining the upper portion of the
steering wheel tilt shock to the pivot tube (see Figure
5-17). Torque fastener to specification.
TORQUE
Tilt Shock Bolt:
7 ft-lb (10 Nm)

14.Be sure the front wheels are facing straight forward.
Remove the steering wheel and align as needed.
Torque the steering wheel nut to specification. Apply
®
Loctite 271 .
™
TORQUE
Steering Wheel Nut: 8
65 ft-lbs (88 Nm)

®
15.Wipe the pivot tube clean of any excess Loctite .
16.Install steering wheel cap and field test steering
operation.

9928689 - 2018 RZR RS1 Service Manual 8.19
© Copyright Polaris Industries Inc.