Page 389 - Manual Oficina Polaris RS1 2018 e 2019
P. 389

STEERING / SUSPENSION


                   10.Turn  the  compression   adjuster  knob  counter-  13.Using a 3/32" Allen wrench, remove IFP bleed screw.
                      clockwise (soft) until it stops, so damping is in the full
                      open position.





















                                                                         14.Apply a thin film of oil to IFP O-ring and wear band.
                                                                            Insert IFP into reservoir until completely submerged.
                   11. Use the appropriate shock body holding tool to       Allow air to escape as you install the piston.
                      properly secure the shock assembly into a vice for
                      service.

                          Front Shock Body Holding Tool: PU-50979
                          Rear Shock Body Holding Tool: PU-50938

                   12.Fill the shock body and remote reservoir 1/2 full of the
                      recommended gas shock oil.






                                                                                                                              8




                                                                         15.Screw IFP Tool (PS-45908) onto the floating piston.










                                   FLUID CAPACITY
                                Recommended Shock Oil:
                         Racing Gas Shock Oil (PN 2874124) (Quart)
                             10 Weight for Walker Evans Shocks














                   9928689 - 2018 RZR RS1 Service Manual                                                              8.41
                   © Copyright Polaris Industries Inc.
   384   385   386   387   388   389   390   391   392   393   394