Page 442 - Manual Oficina Polaris RS1 2018 e 2019

BODY / FRAME

HOOD AND FRONT BODY WORK 6. Push the cluster wiring harness out of its mounting
Hood Removal slot in the upper dash.
1. To remove the hood, disengage both 1/4 turn latches
q.

7. Remove any accessory connectors w from their relay
caps and move them out of the way.
2. Lift rear of hood and slide forward to disengage the
front tabs and remove hood from the vehicle.

Dash Removal
3. Remove the hood as previously described.
4. Remove two screws retaining visor panel to the body
panel.
5. Remove the visor panel by pulling directly up on the
panel to disengage the tabs.

8. Remove four tuflok fasteners e from the front of the
upper dash.

10.16 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.