Page 444 - Manual Oficina Polaris RS1 2018 e 2019
P. 444
BODY / FRAME
ROCKER PANELS, CONSOLE, AND FLOOR 7. Remove the RH close-off panel t.
LH Rocker Panel Removal
1. Remove the LH rear fender.
2. Remove the gas cap q.
8. Remove three T40 Torx screws y and two Tuflok
fasteners u from the RH rocker panel and remove
the rocker panel.
3. Open the door, and remove five T40 Torx screws w
and one Tuflok fastener e from the rocker panel.
Console and Floor Removal
9. Remove the seat.
10.Remove the hood, and upper/lower dash panels (See
4. Remove the rocker panel. Hood and Front Body Work, page 10.16 outlined in
this chapter).
RH Rocker Panel Removal
5. Remove the RH rear fender. 11. Remove the ECU harness connectors i, four T25
6. Remove five T40 Torx screws r from the console. torx screws o and remove the ECU.
10.18 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.
