Page 445 - Manual Oficina Polaris RS1 2018 e 2019

BODY / FRAME

12.Disconnect the electrical connectors for the 17.Push the grommet k and electrical harness through
accessory light switch a, headlight switch s, AWD the floor to the front side of the vehicle.
switch d, and ignition switch f.

18.Remove the fastener l retaining the upper steering
13.Remove seven T40 Torx screws g, three Tuflok shaft to EPS unit.
fasteners h, and remove the console j.

19.Open the door. Remove four T40 Torx screws 1( from
14.Disconnect the following electrical connections: the lower front fender and remove the latch striker 2).
• EPS
• PPS
• Instrument Cluster
• 12V receptacle
• Block Terminal
15.Remove the Digital Wrench diagnostic connector
from its cover. 10
16.Remove all Panduit straps retaining the electrical
harness to the steering assembly and main floor.

9928689 - 2018 RZR RS1 Service Manual 10.19
© Copyright Polaris Industries Inc.