Page 446 - Manual Oficina Polaris RS1 2018 e 2019

BODY / FRAME

20.Remove the T40 Torx screw. Remove the upper 2@ 26.Remove three fasteners 3) from the accelerator
and lower fenders 2#. pedal 3!, and remove the accelerator pedal.
27.Remove four fasteners 3@ from the EPS mounting
bracket 3#, and remove the EPS unit, mounting
bracket, and brake pedal as an assembly.

21.Repeat for opposite side of vehicle.
22.Remove four fasteners 2 $ from the lower steering
support 2% and dash bracket 2^.
28.Remove seven T40 Torx screws 3$ and two Tuflok
fasteners 3% from the main floor.

23.Remove the dash bracket, and lower steering support
bracket along with the upper steering assembly.
24.Remove the brake pedal pin clip 2& and clevis pin 2* 29.Remove shift linkage from the shift lever. Move shift
from the brake pedal. linkage out of the way.
25.Remove the fastener 2( from the lower steering shaft 30.Remove the steering boot 3^ from the main floor.
and disconnect the lower steering shaft from the EPS
unit.

10.20 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.