Page 443 - Manual Oficina Polaris RS1 2018 e 2019
P. 443
BODY / FRAME
9. Remove eight Tuflok fasteners r retaining the upper 13.Remove one Tuflok fastener u from the console, and
dash to the lower dash, and upper front fenders. three T40 Torx screws i from the floor panel.
10.Remove upper dash from the vehicle. 14.Remove the LH and RH lower dash panels from the
11. Remove four T40 Torx screws t from the lower vehicle.
dash.
REAR RACK
1. Disengage two 1/4 turn latches q on the radiator
cover, and remove the radiator cover.
12.Remove the wiring connector from the 12 volt outlet
y in the dash.
2. Remove six T40 Torx screws w from the rear cargo
rack and remove the rack from the vehicle.
10
9928689 - 2018 RZR RS1 Service Manual 10.17
© Copyright Polaris Industries Inc.
