Page 116 - Manual Oficina Polaris RZR 570 13-18

ENGINE / COOLING SYSTEM

COOLING SYSTEM SPECIFICATIONS COOLING SYSTEM PRESSURE TEST
1. Remove the hood from the front cab.
COOLANT TEMPERATURE
CONDITION
°F (°C) WARNING
Room Temperature 68° F (20° C) Never remove pressure cap when engine is warm or
hot. The cooling system is under pressure and serious
Thermostat Open 180° F (82° C) burns may result. Allow the engine to cool before
servicing.
Fan Off 192° F (89° C)

Fan On 198° F (92° C) 2. Remove pressure cap and pressure test the cooling
system using a commercially available pressure
Thermostat Full Open 203° F (95° C) tester.
Lift
Engine Temperature 233° F (112° C)
Overheat Indicator
Engine Protection
Ignition Misfire 236° F (113° C)

Engine Protection 257° F (125° C)
Shutdown

ITEM SPECIFICATION

Cooling System Capacity 4.25 qts. (4 l)
Pressure Cap Relief 13 PSI

50/50 EXTENDED- LIFE ANTIFREEZE PART
NUMBERS
PART NUMBERS DESCRIPTION
2880514 1 US Quart (0.9 L) / 12 per
case
2880513 1 US Gallon (3.8 L) / 6 per
case
2880512 55 US Gallon Drum (208
L)
Recommended Coolant 3. The system must maintain 10 psi for five minutes or
longer. If pressure loss is evident within five minutes,
Use only high quality antifreeze/coolant mixed with check the filler neck, radiator, hoses, clamps and
distilled water in a 50/50 ratio, depending on freeze water pump weep hole for leakage.
protection required in your area.
CAUTION
Using tap water in the cooling system will lead to a
buildup of deposits which may restrict coolant flow and
reduce heat dissipation, resulting in possible engine
damage. Polaris Premium 50/50 Antifreeze/Coolant is
recommended for use in all cooling systems and comes
pre-mixed, ready to use.

3.18 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.