Page 121 - Manual Oficina Polaris RZR 570 13-18

ENGINE / COOLING SYSTEM

10. Remove the CPS sensor from the stator cover on the 16. If needed, install the stator cover removal handle tool
right-hand side of the engine. Inspect CPS O-ring (PA-49317) to the water pump cover bolt holes to aid
and replace if needed. in stator cover removal.

3

CAUTION
11. Remove the oil dipstick. The flywheel contains powerful magnets. Use caution
when removing the stator cover.
12. Remove the eight bolts q retaining the water pump
cover to the stator cover. DO NOT place fingers between cover and crankcase at
any time during the removal process or injury could
result.

17. Remove and discard the stator cover gasket.

13. Remove the water pump cover w and water pump
cover gasket e. Discard the water pump gasket.
14. Remove the water pump impeller r.
NOTE
The water pump impeller uses reverse (LH) threads. CAUTION
Be sure engine coolant does not contaminate the
15. Remove the thirteen bolts securing the stator cover engine oil during stator cover service.
to the engine.
18. Bring the stator cover assembly to a clean work
bench.

9926813 R06 - 2013-2016 RZR 570 Service Manual 3.23
© Copyright Polaris Industries Inc.