Page 118 - Manual Oficina Polaris RZR 570 13-18

ENGINE / COOLING SYSTEM

COOLANT DRAIN / RADIATOR REMOVAL 8. Remove the front bumper (see Chapter 10 – Front
Coolant Drain Bumper, page 10.14).
9. Remove the upper engine outlet hose and recovery
1. Remove the hood from the front cab.
hose from the top of the radiator.
WARNING 10. Remove the two upper radiator retaining bolts and
Never drain the coolant when the engine and radiator the four bolts retaining the lower radiator mount
are warm or hot. Hot coolant can cause severe burns. bracket. Remove the bracket from the frame.
Allow engine and radiator to cool.

2. Slowly remove the pressure cap to relieve any
cooling system pressure.

3. Place a suitable drain pan underneath the radiator
fitting on the front right-hand side of the vehicle.
4. Drain the coolant from the radiator by removing the
lower coolant hose q from the radiator as shown.
Properly dispose of the coolant.

11. Disconnect the fan motor and remove the radiator
from the vehicle. Take care not to damage the
cooling fins.
12. Reverse procedure for installation.

5. Allow coolant to completely drain.
6. Place a suitable drain pan underneath the lower
engine hose w on the right-hand rear side of the
vehicle.

7. Remove the hose and completely drain the engine.
Radiator Removal

3.20 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.