Page 182 - Manual Oficina Polaris RZR 570 13-18

ENGINE / COOLING SYSTEM

5. Fully install starter gear onto the crankshaft as 10. Torque new flywheel nut u to specification.
shown.

6. Align the flywheel keyway with flywheel key on the TORQUE
crankshaft.
Flywheel Retaining Nut:
7. By hand, lightly press the flywheel inward while 133 ft-lbs (180 Nm)
rotating the starter gear counter clock-wise. Fully
install the flywheel until seated on the crankshaft 11. Install starter idler gear i and shaft o.
taper.

8. Install the flywheel washer.
9. Hold flywheel with commercially available strap
wrench.

3.84 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.