Page 262 - Manual Oficina Polaris RZR 570 13-18

PVT SYSTEM

6. Remove the spider assembly r and spring. 9. Remove the clutch assembly from the holding tool.
10.Press out the spring pins a in the inner sheave.

NOTE
11. Pull out the clutch roller pins s and rollers d.
Spring is compression only and has no torsional wind.

7. Remove the inside spider plate t and spider
dampener y. Inspect the spider dampener for wear
and replace if needed.

12.Press the shaft and bearing out of the outer sheave
using an arbor press.

8. Remove the E-clips u, washers i, and the clutch
rollers o. Inspect the rollers for wear; replace if worn.

5.30 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.