Page 291 - Manual Oficina Polaris RZR 570 13-18

TRANSMISSION

SNORKEL GEAR BACKLASH PROCEDURE 4. Apply a small amount of white lithium grease or Anti-
Seize on the threads of the snorkel tube.
1. Reassemble the snorkel tube and snorkel shaft
assembly by reversing the disassembly procedure
(see “Snorkel Shaft Removal / Disassembly” in
previous section).

5. Install the snorkel shaft into the gearcase. Using the
Snorkel Tool (PA-50231), tighten the snorkel tube
until it is lightly seated in the transmission housing.

6

2. After the 13T gear and bearing are pressed onto the
snorkel shaft (flush to the shoulder), install the
washer and new retaining ring.
3. Press the gear back towards the retaining ring. Avoid
excessive force so the retaining ring is not damaged
or pre-stressed significantly.
NOTE

Failure to press the gear back against the washer and
retaining ring will lead to a gear backlash change after
vehicle is placed into service.

9926813 R06 - 2013-2016 RZR 570 Service Manual 6.21
© Copyright Polaris Industries Inc.