Page 409 - Manual Oficina Polaris RZR 570 13-18

BRAKE SYSTEM

CALIPER REMOVAL CALIPER DISASSEMBLY
1. Elevate and safely support the front of the vehicle. 1. Remove both brake pads from the caliper (see
Chapter 9 – FRONT BRAKE PADS - Pad Removal,
2. Remove the four wheel nuts and the front wheel.
page 9.19).
CAUTION 2. Remove mount bracket assembly and dust boots.
Use care when supporting vehicle so that it does not tip
or fall. Severe injury may occur.

3. Clean caliper area before removal.

4. Place a container below the caliper to catch brake
fluid when removing the line. Remove brake line
from caliper.

3. Thoroughly clean the caliper before disassembly and
prepare a clean work area for disassembly.
4. Use a commercially available caliper piston pliers to
extract the pistons from the caliper.
5. Loosen brake pad adjustment set screw 2-3 turns to
allow brake pad removal after the caliper is removed.

9

NOTE
Do not remove the caliper pistons with a standard
6. Remove and discard the two caliper mounting bolts pliers. The piston sealing surfaces will become
and remove the caliper assembly from the front hub. damaged if a standard pliers is used.

9926813 R06 - 2013-2016 RZR 570 Service Manual 9.23
© Copyright Polaris Industries Inc.