Page 114 - Manual_Polaris_RZR_ProXP-20-21

MAINTENANCE

ENGINE / EXHAUST
ENGINE OIL LEVEL 7. Add the recommended oil as necessary to bring the
The engine is a wet-sump design, meaning the engine oil oil level within the SAFE range (between the holes)
is contained in the bottom of the crankcase. To check the on the dipstick. Do NOToverfill.
oil level, follow the procedure listed below.
Access the oil dipstick through the opening in front of the
passenger rear tire.
Access the oil fill cap by removing the cargo box.
Polaris recommends the use of PS-4 Synthetic or PS-4
Extreme Duty Synthetic Engine Oil.

FLUID CAPACITY
Recommended Engine Oil:
PS-4 (PN 2876244)
Ambient Temp Range: -35° F to 100° F

PS-4 Extreme Duty (PN 2878920)
Ambient Temp Range: 0° F to 120° F
NOTICE
Capacity:2.75 qt (2.6 L) A rising oil level between checks during cold weather
operation can indicate contaminants such as gas or
moisture collecting in the crankcase. If the oil level is
1. Position vehicle on a level surface and place over the upper mark, change the oil immediately.
transmission in PARK.
2. Allow engine to cool down before draining oil. 8. Remove the cargo box. Add engine oil through the oil
3. Remove the access panels behind the seats to fill cap w located on top of the engine valve cover.
access the dipstick.
4. Unlock the dipstick lever q. Remove the dipstick and
wipe it dry with a clean rag.

9. When finished, reinstall dipstick and lock the lever.

5. Reinstall the dipstick to fully seat it. Do not lock the
dipstick.

IMPORTANT
Make certain the dipstick is inserted all the way down to
ensure an accurate reading.

6. Remove the dipstick and check the oil level.

2.28 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.