Page 130 - Manual_Polaris_RZR_ProXP-20-21

MAINTENANCE

FRONT GEARCASE LUBRICATION 1. Remove the fill plug.

NOTICE 2. Place a drain pan under the front gearcase drain
plug.
It is important to follow the front gearcase maintenance
intervals described in the Periodic Maintenance Chart. 3. Remove the drain plug w and allow fluid to drain
Regular fluid level inspections should be performed as completely.
well.

The front gearcase fluid level should be checked and
changed in accordance with the maintenance schedule.
• Be sure vehicle is positioned on a level surface when
checking or changing the fluid.
• Check vent hose to be sure it is routed properly and
unobstructed.

FRONT GEARCASE FLUID LEVEL CHECK
The fill plug is located on the bottom right side of the front
gearcase. Access the fill plug through the right front
wheel well.

1. Position vehicle on a level surface.
4. Clean the drain plug magnetic surface.
2. Remove the fill plug q and check the fluid level.
5. Reinstall the drain plug and torque to specification.
6. Add the recommended amount of fluid through the fill
hole. Do not overfill.
FLUID CAPACITY
Recommended Front Gearcase Fluid:
Demand Drive Fluid 2877922 (quart)
Capacity: approx. 9.5 oz (280 mL)

7. Reinstall the fill plug and torque to specification.
TORQUE
Front Gearcase Fill / Drain Plug Torque:
10 ft-lbs (14 N·m)

3. If fluid level is not within specification. add the 8. Check for leaks. Dispose of used fluid properly.
recommended fluid as needed. Do not overfill.
IMPORTANT
Do NOT fill to threads on fill plug. If the fluid is up to the
threads, the front drive is overfilled.

4. Reinstall the fill plug and torque to specification.
TORQUE
Front Gearcase Fill / Drain Plug Torque:
10 ft-lbs (14 N·m)

FRONT GEARCASE FLUID CHANGE
The drain plug is located on the bottom of the front
gearcase. Access the drain plug through the access hole
in the frame underneath the front gearcase.

2.44 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.