Page 159 - Manual_Polaris_RZR_ProXP-20-21

ENGINE / COOLING SYSTEM

MUFFLER REMOVAL MUFFLER INSTALLATION

1. Remove six fasteners q retaining the muffler cover / 1. Install the muffler studs into the mounting grommets
rear fascia . on the chassis.
2. Install a new muffler gasket and install the three
fasteners retaining the muffler to the exhaust pipe.
Torque fasteners to specification.
TORQUE
Exhaust Pipe Fasteners:
18 ft-lb (24 Nm)
3

3. Install the two muffler springs.
4. Install the rear fascia / muffler cover. Torque fasteners
to specification
TORQUE
Rear Fascia / Muffler Cover Screws:
2. Remove two muffler springs w. 8 ft-lb (11 Nm)

3. Remove three fasteners e retaining the muffler to the
exhaust pipe.

4. Pull muffler towards the rear of the vehicle to remove
it from the mounting grommets.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 3.15
© Copyright Polaris Industries Inc.