Page 193 - Manual_Polaris_RZR_ProXP-20-21

ENGINE / COOLING SYSTEM

34.Remove fasteners 2! and washers 2@ retaining inner ENGINE INSTALLATION
cover to transmission.
1. If removed from engine: install applicable coolant
hoses, stator/flywheel, starter and engine sensors.
2. Install engine in the chassis, be careful not to snag
any hoses or wiring.
3. Install fasteners retaining engine to the engine mount
bracket. Torque fasteners to specification.

TORQUE
Engine Mounting Bracket Fasteners: 3
42 ft-lb (57 Nm)

4. Loosely install fasteners retaining inner cover to the
transmission and engine/trans joint.

35.Discard PVT inner cover o-ring around the crankshaft
snout.
36.Remove fasteners2#2$ retaining engine to the engine
mount bracket.

5. Loosely install the three allen screws 2! and washers
2@ retaining inner cover to engine.

37.Lift engine out of the chassis, be careful not to snag
any hoses or wiring.
38.If replacing engine: remove applicable coolant
hoses, stator/flywheel, starter and engine sensors.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 3.49
© Copyright Polaris Industries Inc.