Page 336 - Manual_Polaris_RZR_ProXP-20-21

PVT SYSTEM

3. Re-install the retaining fasteners t and movable 4. Using clutch compressor PU-50518 compress the
sheave y onto the helix u using previous hole driven clutch assembly.
orientation.

IMPORTANT
Using previous hole orientation will ensure the driven
clutch maintains balance.

CAUTION
The helix cover is loaded by the spring. Not using a
proper compressor may result in personal injury or
damage to the clutch.

5. Torque the fasteners i to specification.

TORQUE
Helix Fasteners:
44 ft-lbs (60 Nm)

6. Once back together, verify the alignment marks made
during disassembly are properly aligned.
7. Install the stationary and movable sheave on the
vehicle. See Driven Clutch Installation.

6.46 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.