Page 333 - Manual_Polaris_RZR_ProXP-20-21

PVT SYSTEM

HELIX AND MOVABLE SHEAVE 2. Inspect the Teflon® coating e on the Helix bushing.
BUSHING INSPECTION Inspect Helix for signs of wear, grooving or notching
on ramps. De-glaze surfaces with a 3M Scotch-
1. Inspect the Teflon® coating q on the moveable Brite™ Pad if needed. Replace if needed by removing
sheave bushing. Inspect Sheave for signs of wear, the snap ring r.
grooving or cracking. De-glaze sheave surfaces with
a 3M Scotch-Brite™ Pad if needed. Replace if Helix Bushing Inspection:
needed by removing the snap ring w. Replace the Helix bushing if more brass than Teflon® is
visible on the bushing. Refer to Bushing Service page
Moveable Sheave Bushing Inspection: 6.35procedure.
Replace the movable sheave if more brass than
Teflon® is visible on the bushing.

6

BUSHING SERVICE
MOVEABLE SHEAVE - BUSHING REMOVAL
1. Remove clutch as outlined previously in this chapter.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 6.43
© Copyright Polaris Industries Inc.