Page 338 - Manual_Polaris_RZR_ProXP-20-21

PVT SYSTEM

5. Remove the Driven Clutch Bolt and washer. 8. Remove the drive clutch bolt w and drive clutch.
IMPORTANT
Ensure the drive clutch taper and engine taper are
clean and free of debris.

6. Add shims q to move the belt closer to the inner
sheave of the drive clutch, or remove shims to move
the belt closer to the outer sheave of the drive clutch.
IMPORTANT
Ensure the driven clutch splines and transmission 9. Reinstall the drive clutch and bolt. Torque the drive
splines and shaft are clean and free of debris. clutch bolt to specification.

TORQUE
7. Reinstall the washers and Driven Clutch Bolt. Torque Drive Clutch Retaining Bolt:
to specification.
140 ft-lbs (190 Nm)
TORQUE
Driven Clutch Bolt: 10.Reinstall the drive belt and outer cover assembly.
26 ft-lbs (35 Nm)

NOTICE
When finished, the driven clutch should not rotate on its
own, or should stop with minimal drag when using a
new bearing.

6.48 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.