Page 561 - Manual_Polaris_RZR_ProXP-20-21

ELECTRICAL

BATTERY REMOVAL BATTERY INSTALLATION

1. Remove the driver’s seat to access the battery q.
CAUTION
Using a new battery that has not been fully charged can
damage the battery, result in a shorter life and hinder
vehicle performance.

1. Ensure the battery is fully charged.
2. Place the battery in the battery holder and secure
with hold-down strap. Torque fasteners to
specification.
TORQUE
Battery Mount Bracket Fasteners:
53 in-lbs (6 Nm)

2. Disconnect the black (negative) battery cable(s). 3. Coat the terminals with dielectric grease or petroleum
jelly.
3. Disconnect the red (positive) battery cable(s).
4. Connect and tighten the red (positive) q cable(s)
first.
CAUTION
To reduce the chance of sparks: Whenever removing 5. Connect and tighten the black (negative) w cable(s)
the battery, disconnect the black (negative) cable first. last. Torque terminal fasteners to specification.
When reinstalling the battery, install the black (negative)
cable last.

4. Remove the battery hold-down bracket fasteners w,
and remove the bracket.

TORQUE
Battery Terminal Fasteners:
60 in-lbs (7 Nm)

6. Verify that cables are properly routed and reinstall the
5. Lift the battery out of the vehicle.
driver’s seat.

12

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 12.25
© Copyright Polaris Industries Inc.