Page 565 - Manual_Polaris_RZR_ProXP-20-21

ELECTRICAL

TAIL LIGHT REPLACEMENT
Before replacing the taillight(s), use a digital multi-meter
to test the harness to ensure the lamp is receiving 12
volts and that a ground path is present.
REMOVAL

1. Disconnect the wire harness q.
2. While holding the taillight assembly, remove the three
nuts w retaining the taillight assembly and remove it
from the rear fascia.

INSTALLATION
1. Reverse the removal procedure for tail light
installation.
TORQUE
Tail Light Mounting Fasteners:
24 in-lb (3 Nm)

DASH LIGHT
The LED light will remain ON for approximately 30
seconds after key has been switched to the OFF
position.

12

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 12.29
© Copyright Polaris Industries Inc.