Page 105 - Manual Oficina XP 1000 14-16

ENGINE / COOLING SYSTEM

10. Remove the outer clutch cover screws w and 12. Disconnect the TMAP sensor e, fuel injector
remove the cover from the vehicle. harness leads r, CPS t, ECT sensor y, and
ignition coil harness lead. Remove wire ties retaining
harness to the fuel rail and rear cross member.

3

11. Remove drive belt, drive clutch, driven clutch, inner
clutch cover and clutch outlet duct (see Chapter 5 –
PVT Disassembly (2014–2015), page 5.11).
13. Disconnect the stator harness.
CAUTION 14. Remove (+) positive cable from the starter motor.
Correct Drive Clutch Puller P/N 2872085 15. Remove (-) negative cable from the starter mounting
bolt.
16. Disconnect fuel lines and remove throttle body
assembly (See Chapter 4 – Fuel Line Removal /
Installation, page 4.17 Fuel Line Removal /
Installation, page 4.17Throttle Body Removal, page
4.34). Make note of line routing for installation.

17. Remove spark plug wires from the engine.
NOTE
The spark plug wires are marked with MAG and PTO.
Note during installation procedure.

18. Remove the breather hose u from the crankcase.

NOTE
Be sure to use the correct Drive Clutch Puller (PN
2872085) to prevent damage to crankshaft.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 3.27
© Copyright Polaris Industries Inc.