Page 106 - Manual Oficina XP 1000 14-16

ENGINE / COOLING SYSTEM

19. Remove the six fasteners that attach the exhaust 21. Place a suitable drain pan under the vehicle and
head pipe to the engine. Remove the two exhaust remove the thermostat housing coolant hose g and
springs i that attach the head pipe o to the muffler. the water pump coolant hose h from the engine.
Remove exhaust head pipe towards the front of the Dispose of engine coolant properly.
vehicle. Discard exhaust gaskets a.

22. Use an overhead or portable engine hoist and
20. Remove the four fasteners retaining the box support
suitable engine straps to secure engine in its current
s and the two fasteners retaining the box support position.
bracket d. Remove the push rivet that attaches the
heat shield f to the rear cross member. 23. Remove the four rear mounting bolts j that attach
the rear of the engine to the transmission.

NOTE
It is not necessary to remove the bolts that retain the
bracket k to the transmission.

3.28 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.