Page 111 - Manual Oficina XP 1000 14-16

ENGINE / COOLING SYSTEM

33. Install the rear bumper and cargo box as an 37. Add approximately 2.5 quarts (3.3 L) of Polaris PS-4
assembly. or PS-4 Extreme Duty Synthetic Engine Oil to the
engine. Additional oil may be required after complete
NOTE engine disassembly. Check level after filling and add
oil as needed.
Be sure to connect the engine intake hose and clutch
air intake hose to the rear cargo box asm upon 38. Follow the Cooling System Bleeding Procedure,
installation. page 3.20 as outlined in this chapter.

34. Connect the (-) negative battery cable. 39. Install the seats.
35. Remove the pressure cap and fill the cooling system 40. Start engine and check for any oil or coolant leaks.
through the filler neck with properly mixed anti-freeze 41. Check the engine oil level. 3
/ coolant.
42. Refer customer to “Engine Break-In Period” upon
36. Install a new oil filter. Lubricate the seal with engine returning vehicle to customer.
oil prior to installation (see Chapter 2 – Engine Oil
and Filter Change, page 2.11).

ENGINE MOUNTING AND TORQUE VALUES

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 3.33
© Copyright Polaris Industries Inc.