Page 129 - Manual Oficina XP 1000 14-16

ENGINE / COOLING SYSTEM

10. Use one of the oil pump retaining bolts or a pen 12. Visually inspect the oil pump and drive sprocket d
magnet to extract the dowel pins s from the oil for wear or damage. Replace oil pump drive chain
pump. Doing so allows for oil pump removal without and sprocket if worn or damaged. If any part of the oil
having to remove the pump drive sprocket. pump is damaged, the entire assembly must be
replaced. Replace the oil pump seal f during
crankcase assembly.

3

NOTE
If unable to extract the dowel pins from the oil pump, NOTE
the oil pump sprocket must be removed. Access the
sprocket bolt by removing the case plug. Oil pump assembly is non-serviceable

11. Lift the oil pump drive chain and remove the oil 13. Rotate the engine so the cylinder is facing up.
pump.
14. Remove the eleven M6 g and two M8 h upper
crankcase bolts.

15. Rotate the engine so the cylinder is facing down.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 3.51
© Copyright Polaris Industries Inc.