Page 256 - Manual Oficina XP 1000 14-16

PVT SYSTEM

12.Press the shaft and bearing out of the outer sheave DRIVEN CLUTCH BUSHING SERVICE
using an arbor press.
NOTE

Special Tools Required for this service

Special Tools

PART # TOOL DESCRIPTION
Clutch Bushing Tool Kit (see breakdown
2201379
below)
2870386 Piston Pin Puller
Clutch Bushing Replacement Tool Kit
2871226
(see breakdown below)

13.Inspect the bearing f for wear. Spin the bearing, if
the bearing does not spin smoothly, replace it. To
replace the bearing, remove the snap ring g from the
end of the shaft and press the bearing off the shaft.

Clutch Bushing Tool Kit - 2201379

PART
ITEM TOOL DESCRIPTION
#
14.Inspect the cam (helix) assembly bushing h for wear. 51320-
If the bushing is worn or the shaft does not fit snug q 27 Puller Tool
into the bushing, replace the cam (helix) assembly.
r 51325- Puller Nut
01
51320-
y Main Adapter
29
51320-
u 28 Bushing Removal Tool

15.Inspect the sheaves for excessive wear or damage.

5.32 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.