Page 255 - Manual Oficina XP 1000 14-16

PVT SYSTEM

5. Press down on the top of the spider assembly, 8. Remove the E-clips u, washers i, and the clutch
pushing the spider onto the shaft. Remove snap ring rollers o. Inspect the rollers for wear; replace if worn.
e and slowly release the assembly.

9. Remove the clutch assembly from the holding tool.
6. Remove the spider assembly r and spring. 10.Press out the spring pins a in the inner sheave.
5

NOTE 11. Pull out the clutch roller pins s and rollers d.

Spring is compression only and has no torsional wind.

7. Remove the inside spider plate t and spider
dampener y. Inspect the spider dampener for wear
and replace if needed.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 5.31
© Copyright Polaris Industries Inc.