Page 263 - Manual Oficina XP 1000 14-16

PVT SYSTEM

6. Note the alignment of the X’s w on the spider and 9. Pull out the clutch slider pins i and sliders o.
moveable sheave. Remove the spider assembly e
and spring.

10.Separate the stationary sheave from the moveable
sheave. Note the X’s a on the stationary and fixed
NOTE sheaves for reassembly.
5
Spring is compression only and has no torsional wind.

7. Remove the E-clips r, washers t, and the clutch
rollers y. Inspect the rollers for wear; replace if worn.

11. Inspect the clutch bushings for wear. If there is heavy
wear on the bushings, replace the clutch assembly.
12.Inspect the sheaves for excessive wear or damage.

8. Press out the spring pins u in the inner sheave.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 5.39
© Copyright Polaris Industries Inc.