Page 281 - Manual Oficina XP 1000 14-16

TRANSMISSION

12.Lift up on the shift shaft rail j and move the rail 15.Remove the input shaft 2), gear cluster assembly 2!
assembly rearward to allow the shift fork pins k to be and idler gear shaft assembly 2@ from the
removed from the shift drum l. Remove the shift transmission housing by pulling both assemblies
drum from the transmission housing. straight up.

13.Remove the shift shaft rail j and shift forks from the 16.Place the gear cluster assembly on a clean surface
transmission housing as an assembly. for inspection. If disassembly is required, refer to
“Gear Cluster Disassembly”.
17.Using a 5 mm Allen wrench, remove the screws that
secure the pinion shaft assembly 2#. Lift the pinion
shaft assembly straight up to remove it from the 6
housing. Note the longer screw 2 $ that locks the
snorkel tube.

14.Remove the rear output shaft assembly 1( by lifting
underneath the gear or by tapping the shaft from the
opposite side.

18.Remove all seals from the gearcase halves and clean
the cases in preparation for assembly.

Gear Cluster Disassembly

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 6.13
© Copyright Polaris Industries Inc.