Page 279 - Manual Oficina XP 1000 14-16

TRANSMISSION

TORQUE TORQUE
Intake Manifold: Outer Radius Rod Bolts:
22 ft-lb (30 Nm) 40 ft-lb (54 Nm)

20.Install inner clutch cover, outlet duct, drive clutch, 25.Install the stabilizer bar link mounting bolts and new
driven clutch, belt and outer clutch cover (see nuts f. Torque to specification.
Chapter 5 – PVT Assembly (2016), page 5.15).
21.Install new spring ring a on rear drive shafts. Apply
an anti-seize compound to the splines s.

TORQUE
6
Stabilizer Bar Linkage:
22.Swing the rear trailing arm out and up. Align the 40 ft-lbs (54 Nm)
splines of the drive shaft with the transmission
splines. Push inward on the trailing arm assembly 26.Safely lower the vehicle.
until the rear drive shafts lock into the transmission
splines. 27.If transmission lubricant was drained, fill the
transmission with the specified amount of Polaris
23.Install the rear shocks onto the trailing arms and AGL (see Chapter 2 – Transmission Lubrication,
install the lower mounting bolts with new retaining page 2.27).
nuts. Torque to specification.
FLUID CAPACITY
TORQUE
Recommended Transmission Lubricant:
Rear Shock Lower Bolt: AGL
70 ft-lbs (95 Nm)
Capacity (Standard):
24.Install the four rear radius rods to the bearing carriers 44 oz (1300 mL)
on each side. Use new retaining fasteners d. Torque
to specification. Capacity (INT’L):
40.5 oz (1200 mL)

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 6.11
© Copyright Polaris Industries Inc.