Page 344 - Manual Oficina XP 1000 14-16

FINAL DRIVE

12. Carefully install the LH output hub assembly into the FRONT GEARCASE INSTALLATION
cover plate. Take care not to damage the new cover 1. Install the gearcase back into the vehicle through the
plate seal while installing the output hub. LH wheel well area, above the upper A-arm.

2. Lubricate the front gearcase splines with Anti-Seize.

13. Install the output cover assembly onto the gearcase 3. Install the prop shaft onto the front gearcase input
housing. Install the seven cover plate screws and shaft. Use a NEW spring pin in the front propshaft.
torque to specification. 4. Install the four bolts q that secure the front gearcase
to the frame and torque to specification.
TORQUE

Front Gearcase Mounting Bolts:
30 ft-lbs (41 Nm)

5. Install the vent line w.

TORQUE
Cover Plate Screws:
11 ft-lbs (15 Nm)

7.42 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.