Page 343 - Manual Oficina XP 1000 14-16

FINAL DRIVE

7. Align spring retainer dowel pin with ring gear dowel 9. Install armature plate. Be sure all of the armature
pin and install the retainer on top of the torsion plate tabs are fully engaged into the roll cage
spring. assembly and that it is resting properly on the torsion
spring retainer.

8. Check the action of the torsion spring by rotating in
both directions to ensure the spring and retainer are
installed properly. NOTE
Verify armature plate tabs are in the roll cage slots and
that it rests properly on the spring retainer.

10. Carefully install the ring gear and roll cage assembly
into the gearcase housing.
7

11. Install a new O-ring on the cover plate assembly.
NOTE

Be sure the square O-ring is placed flat on the cover
surface. If the O-ring is twisted fluid leakage may occur.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 7.41
© Copyright Polaris Industries Inc.