Page 103 - Manual Oficina Polaris RZR XP 1000 17-18

MAINTENANCE

SHOCK COMPRESSION ADJUSTMENT The rear shock adjuster can be found on the remote
(WALKER EVANS™) reservoir. Clockwise will increase damping and counter-
clockwise will decrease damping.
The compression damping adjustment is located on the
shock ‘Piggyback’ reservoir of each shock. Damping
adjustments can be made without using any tools.
2
NOTE
When the adjuster knob is turned counter-clockwise
until it stops, the damping is in the fully open position
(softest).

Turn the adjuster knob clockwise w to increase
compression damping. Turn the adjuster knob counter-
clockwise e to decrease compression damping.

NOTE
The recommended factory setting for the front and rear
shocks are provided in the following compression
adjustment tables.

Walker Evans™ 2.0" Front Shock:
Compression Adjustment Table

SETTING COMPRESSION DAMPING
Softest Full counter-clockwise position
Factory 6 clicks from softest position

Firmest Full clockwise position

Walker Evans™ 2.5" Rear Shock:
Compression Adjustment Table

SETTING COMPRESSION DAMPING
Softest Full counter-clockwise position
Factory 7 clicks from softest position
Firmest Full clockwise position

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 2.57
© Copyright Polaris Industries Inc.