Page 140 - Manual Oficina Polaris RZR XP 1000 17-18

ENGINE / COOLING SYSTEM

ENGINE DISASSEMBLY / INSPECTION - TOP END

VALVE COVER REMOVAL CAMSHAFT REMOVAL

NOTICE NOTICE
The valve cover can be removed with the engine The camshafts can be removed with the engine
installed in the chassis. installed in the chassis.

1. Remove the four valve cover shoulder bolts q and 1. Rotate the engine so the PTO cylinder is at Top
isolators w using a T40 driver. Dead Center (TDC) to relieve most of the valve
spring pressure. The camshaft lobes should face out
q and the slots on the end of the camshafts should
line up.

2. Replace isolators w when they are removed and
replace valve cover seal e if oil leaks are evident.
3. Remove the spark plugs r. Stuff spark plug holes
with shop towels to prevent anything from falling into
the combustion chamber.

3.32 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.