Page 139 - Manual Oficina Polaris RZR XP 1000 17-18

ENGINE / COOLING SYSTEM

ENGINE BREAK-IN PERIOD ENGINE LUBRICATION SPECIFICATIONS
The break-in period consists of the first 25 hours of
operation, or the time it takes to use 15 gallons (57 liters) FLUID CAPACITY
of fuel. Careful treatment of a new engine and drive Oil Capacity *
components will result in more efficient performance and 2.5 qt (2.4 L)
longer life for these components.
Oil Type
CAUTION
PS-4 Full Synthetic 5W-50
Use only Polaris PS-4 or PS-4 Extreme Duty Synthetic 2876244 (quart)
4-Cycle Engine Oil.Never substitute or mix oil brands. 2876245 (gallon)
Serious engine damage and voiding of warranty can (-35° F to 100° F) 3
result.Do not operate at full throttle or high speeds for
extended periods during the first three hours of use. PS-4 Extreme Duty
Excessive heat can build up and cause damage to 2878920 (quart)
close fitted engine parts.
2878919 (gallon)
1. Fill fuel tank with unleaded fuel which has a minimum Oil Filter Wrench
pump octane number of 87 = (R + M)/2.
PU-50105 or 2.5″ (64 mm)
2. Refer to “Engine Oil Level”. Check oil level indicated
on dipstick. Add oil if necessary. Oil Filter
PN 2540086
3. Drive slowly at first to gradually bring engine up to
operating temperature.
Oil Pressure Minimum Specification (using Polaris
4. Vary throttle positions. Do not operate at sustained engine oil at operating temperature)
idle or sustained high speed. 10 PSI @ 1200 RPM
5. Perform regular checks on fluid levels, controls and 40 PSI @ 7000 RPM
all important bolt torques.
*Additional oil may be required after complete
6. Change oil and oil filter after 25 hour break-in period.
engine disassembly. Check level after filling and add
oil as needed.

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 3.31
© Copyright Polaris Industries Inc.