Page 135 - Manual Oficina Polaris RZR XP 1000 17-18

ENGINE / COOLING SYSTEM

ENGINE INSTALLATION 5. Align both the front and rear engine mounting
locations. Install and hand tighten the four front
1. Attach engine with suitable lifting straps to an engine mounting nuts q and bolts w.
overhead or portable engine hoist.
2. Remove the engine stand adapter plate and install
the starter motor back onto engine. Torque starter
motor bolts to specification.
3. Install transmission joint bracket onto engine and
torque fasteners to specification in sequence.
3

NOTE
DO NOT torque fasteners at this time.

6. Align transmission joint mounting holes with the
transmission front mounting holes.

TORQUE

Starter Motor Bolts:
7 ft-lb (10 Nm)

Trans Joint Bracket Bolts:
44 ft-lb (60 Nm)

4. Use the overhead or portable engine hoist and
suitable engine straps to lower the engine into the
vehicle frame.
NOTE
Have an assistant help guide the engine in and out of
the vehicle while using an engine hoist to prevent
personal injury or damage to vehicle components.

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 3.27
© Copyright Polaris Industries Inc.