Page 158 - Manual Oficina Polaris RZR XP 1000 17-18

ENGINE / COOLING SYSTEM

5. Measure each bearing journal in two locations, 90 CRANKSHAFT REMOVAL / INSPECTION
degrees apart. Replace balance shaft if either journal 1. Perform Crankcase Disassembly / Inspectionpage
is worn below the service limit specification. If worn 3.47 procedure.
past the service limit, replace the balance shaft
assembly. 2. Perform Balance Shaft Removal / Inspectionpage
3.49 procedure.

3. For ease of assembly, mark each connecting rod and
end cap.
4. Loosen, remove and discard the four connecting rod
bolts q. Remove the end caps from the crankshaft.

MEASUREMENT
Balance Shaft Diameter (MAG & PTO):
1.4939 - 1.4946" (37.946 - 37.962 mm)
Service Limit:
1.4921" (37.900 mm)
5. Carefully lift the crankshaft w out of the crankcase.

6. Remove the cam chain e, oil pump drive chain t
and PTO main seal r from the crankshaft.

3.50 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.