Page 157 - Manual Oficina Polaris RZR XP 1000 17-18

ENGINE / COOLING SYSTEM

16. Remove the eight M10 k, two M8 l and one M6 j BALANCE SHAFT REMOVAL / INSPECTION
lower crankcase bolts. Discard the eight M10 bolts. 1. Perform Crankcase Disassembly / Inspectionpage
3.47 procedure.
2. Note timing marks on balance shaft and crankshaft
drive gears. Shafts must be properly timed upon
assembly.

3

17. Tap on the lower crankcase in reinforced areas with
a soft faced hammer to loosen. Carefully lift up and
remove the lower crankcase half.

3. Carefully rotate the balance shaft w and remove it
from the crankcase.

4. Inspect the balance shaft gear teeth for damage.

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 3.49
© Copyright Polaris Industries Inc.