Page 289 - Manual Oficina Polaris RZR XP 1000 17-18

PVT SYSTEM

5. Install the spring so the arm i rests into the notch in 8. Align the marks previously made on the helix cover
the moveable sheave. and moveable sheave. Install the helix/cover and the
four fasteners a. Torque fasteners to specification.

6. Align the X’s o on the spider and moveable sheave.
TORQUE
5
Helix Retaining Screws:
48 in-lb (5 Nm)

9. Once back together, verify the grease / tape marks
made during disassembly are properly aligned.
10.Install the drive clutch on the vehicle. See PVT
Assemblypage 5.11

7. Install the universal clutch compressor on the clutch
and compress the helix cover.

CAUTION
The helix cover is loaded by the spring. Not using a
proper compressor may result in personal injury or
damage to the clutch.

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 5.29
© Copyright Polaris Industries Inc.