Page 284 - Manual Oficina Polaris RZR XP 1000 17-18

PVT SYSTEM

2. Install the non-braking needle bearing q, the two 6. Install clutch onto holding fixture and secure in a
washers w and the spacer r onto the stationary bench vice. Tighten the spider o using Clutch Spider
sheave e. Tool a. Torque spider to specification.

3. Install moveable sheave onto stationary sheave
shaft. Be sure the moveable sheave slides freely on Clutch Holding Fixture: 2871358–A
the spacer. Clutch Spider Tool: 2870341
4. Apply 0.4 mL of Loctite® 620™ and 0.4 mL of
Loctite® 7088™ Primer in 90° apart in vertical stripes TORQUE
to the shaft threads.
Spider Assembly:
5. Install the spider assembly onto the shaft threads. Be 290 ft-lb (393 Nm)(Apply 0.4 mL Loctite® 7088
sure all of the alignment marks i are in alignment. Primer and 0.4 mL Loctite® 620™) in 90° apart in
vertical stripes to the shaft threads.

7. Apply 0.1mL of Loctite® 620™ and 0.1mL of
Loctite® 7088™ Primer in 90° apart to the threads of
the spider jamb nut. Install spider jam nut s onto
stationary shaft threads.

t Moveable Sheave y Jam u Spider
Asm Nut

5.24 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.