Page 287 - Manual Oficina Polaris RZR XP 1000 17-18

PVT SYSTEM

4. Spin the compressor down until it just starts to 7. Remove the E-clips r, washers t, and the clutch
contact the helix cover. Remove the four screws q rollers y. Inspect the rollers for wear; replace if worn.
that secure the cam (helix) assembly using a T25
Torx driver.

8. Press out the spring pins u in the inner sheave.
5
CAUTION
The helix cover is loaded by the spring. Not using a
proper compressor may result in personal injury or
damage to the clutch.

5. Remove the universal clutch compressor.
6. Note the alignment of the X’s w on the spider and
moveable sheave. Remove the spider assembly e
and spring.

9. Pull out the clutch slider pins i and sliders o.

NOTICE
Spring is compression only and has no torsional wind.

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 5.27
© Copyright Polaris Industries Inc.