Page 353 - Manual Oficina Polaris RZR XP 1000 17-18

FINAL DRIVE

7. Torque the support bearing fasteners to REAR PROP SHAFT INSTALLATION XP 4
specification.
1. Reverse the appropriate Rear Prop Shaft Removal
TORQUE XP 4page 7.23 procedure to reinstall the rear prop
shaft.
Support Bearing Fasteners:
35 ft-lb (47 Nm) 2. Lubricate the transmission output shaft splines with
Polaris All Purpose Grease.
8. Align the front prop shaft paint mark with the front 3. Lubricate the front and rear prop shaft mid joint with
gearcase input shaft mark so the pin holes align. Polaris All Purpose Grease.
Install a new roll pin.
4. Align the front and rear prop shafts and slide them
together.

7

NOTE
Paint marks are applied to the front and rear prop shafts
to aid shaft alignment. Reference these marks during
installation if still visible.

5. Torque the support bearing fasteners to specification.

TORQUE
Support Bearing Fasteners:
35 ft-lb (47 Nm)

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 7.27
© Copyright Polaris Industries Inc.