Page 348 - Manual Oficina Polaris RZR XP 1000 17-18

FINAL DRIVE

REAR PROP SHAFT REMOVAL 4. Once the front and rear prop shafts have been
1. Remove the center console. separated, slide the rear prop shaft forward to
remove it from the transmission output shaft.

q Cap e Torx Screw
5. Remove the support bearing rubber bushing by
pulling it off the rear prop shaft.
w Shifter r Push Rivet
6. Remove the rear prop shaft out of the left rear of the
2. Remove the two fasteners t retaining the support vehicle.
bearing cover y to the frame.

3. While moving the prop shaft support bearing
assembly, slide the rear prop shaft towards the rear
until the front prop shaft yoke disengages from the
splines.

7.22 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.