Page 357 - Manual Oficina Polaris RZR XP 1000 17-18

FINAL DRIVE

FRONT GEARCASE REMOVAL FRONT GEARCASE DISASSEMBLY /
1. Raise and support vehicle INSPECTION

2. Place gear selector in neutral. 1. Drain and properly dispose of gearcase fluid.
Remove any metal particles from the drain plug
3. Refer to FRONT DRIVE SHAFTpage and remove magnet.
both front drive shafts from the front gearcase.
2. Remove the seven cover screws q and remove the
4. Remove the front section of the prop shaft (see cover plate w assembly.
Chapter 7 – FRONT PROPSHAFT SERVICEpage
).
5. Disconnect the wire harness for the front gearcase
and remove the harness from the retaining dart.

6. Remove the vent line from the front gearcase and
plug vent line fitting.
7. Remove the four bolts r securing the front gearcase
to the frame.

7

8. Rotate front of gearcase up so the input shaft is
facing down. Lift and remove the gearcase from the
front LH wheel well area and slide it out of the vehicle
above the upper A-arm.

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 7.31
© Copyright Polaris Industries Inc.