Page 422 - Manual Oficina Polaris RZR XP 1000 17-18
P. 422

BRAKE SYSTEM

                CALIPER REMOVAL                                      6. Remove the two caliper mounting bolts w and
                1. Elevate and safely support the front of the vehicle.  remove the caliper assembly from the front hub.

                2. Remove the four wheel nuts and the front wheel.
                                     WARNING
                 Use care when supporting vehicle so that it does not tip
                           or fall. Severe injury may occur.

                3. Clean caliper area before removal.
                4. Place a container below the caliper to catch brake
                   fluid when removing the line q. Remove brake line
                   from caliper.




















                5. Loosen brake pad adjustment set screw 2-3 turns to
                   allow brake pad removal after the caliper is removed.










































                9.18                                                   9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
                                                                                                © Copyright Polaris Industries Inc.
   417   418   419   420   421   422   423   424   425   426   427