Page 417 - Manual Oficina Polaris RZR XP 1000 17-18

BRAKE SYSTEM

7. Repeat procedure until clean fluid appears in bleeder
hose and all air has been purged. Add fluid as
necessary to maintain level in reservoir.

IMPORTANT
Do not allow the brake fluid level in the reservoir to drop
below the MIN line to prevent air from entering the
master cylinder.

8. Tighten bleeder screw securely and remove bleeder
hose. Torque bleeder screw to specification.

TORQUE
Bleeder Screw:
48 in-lb (5 Nm)

9. Repeat steps 5 - 8 for the remaining calipers.
10. Add brake fluid to MAX level on reservoir.
Master Cylinder Fluid Level
Between MIN and MAX lines on reservoir.

11. Install master cylinder reservoir cover.
12. Field test machine at low speed before putting into
service. Check for proper braking action and pedal
reserve. With pedal firmly applied, pedal reserve
should be no less than 1/2"(1.3 cm).
13. Check brake system for fluid leaks.

9

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 9.13
© Copyright Polaris Industries Inc.